8
5.Installation of roller brush cover
Please plug the roller brush cover into corresponding buckle holes at the bottom of both
sides of the floor brush components in the direction shown in the figure. The installation
shall be completed once you hear the sound of “Click” after plugging in.
buckle hole
buckle hole
Product Assembly
How to Use
*Tip: Please try to complete a complete charging and discharging process before
using the product to ensure the accuracy of the electric quantity program.
1.Water injection of clean-water tank
1.1 Pull up the handle of clean water tank and lift it up slightly to remove the tank. (as shown in
Figure 1).
1.2 Please rotate counterclockwise to open the cover of the clean water tank and add an
appropriate amount of clean water, and then rotate clockwise to tighten the cover. (as shown in
Figure 2).
1.3 Plug the tank in the corresponding position of the body. The assembly shall be completed
once you hear the sound of “Click” after plugging in.(as shown in Figure 3).
1
2
3
