9
How to Use
Note:
·Please do not add non-designated cleanser or disinfectant to avoid corrosion of the machine.
·Please add special cleanser according to the specified proportion, and do not add too much.
·Please do not add hot water over 60℃ to avoid deformation of the clean-water tank.
2.Start using
2.1 Step on the upper cover of the floor brush, tilt the machine body to a suitable angle. When
pressing “Switch Key” for 2 seconds, machine starts cleaning. When pressing “Switch Key”
again, the machine will be powered off.
2.2 Please do not put the machine body flat or dump it to avoid dirty water flowing out.
3.Switch mode
3.1 Start the automatic mode by default, and press the mode button to adjust the mode (auto
mode, max mode).
3.2 The default of machine is always discharging water. Press the “Self-Cleaning” key, machine
will stop discharging water, accompanying by the voice prompt “Turn off the water output”.
Press the “Self-Cleaning” key again, machine will start to discharge water, accompanying by the
voice prompt “Turn on the water output”.
MAX
Switch key
Self-cleaning key
4.Water adding and pouring
During use, when the clean water in the clean-water tank runs out, the machine will prompt by
voice and screen: “The water bucket is empty please add water”. At this time, it is necessary to
turn off the switch and add clean water. When the amount of water in the dirty-water tank
reaches the upper limit, the floor scrubber will automatically stop and prompt by voice and
screen: “Please clean the sewage bucket to avoid smell”. At this time, it is necessary to dump
the sewage in the dirty-water tank before continuing to use it.
