TA UVR 64 Page 5 Operation And Installation Instructions Manual Download | Manualshive

Page: 5 / 64

background image

5

Safety requirements:

All installation and wiring work on the controller must only be carried
out in a zero-volts state.

The opening, connection and commissioning of the device may only be
carried out by competent personnel. In so doing, all local security re-
quirements must be adhered to.

The device corresponds to the latest state of the art and fulfills all necessary safety condi-
tions. It may only be used or deployed in accordance with the technical data and the safety
conditions and rules listed below. When using the device, the legal and safety regulations
apposite to the particular use are also to be observed.

►

The device must only be installed in a dry interior room.

►

It must be possible to isolate the controller from the mains using an all-pole isolating de-

vice (plug/socket or double pole isolator).

►

Before starting installation or wiring work, the controller must be completely isolated from

the mains voltage and protected against being switched back on. Never interchange the
safety extra-low voltage connections (sensor connections) with the 230V connections. De-
structive and life-threatening voltages at the device and the connected sensors may occur.

►

Solar thermal systems can become very hot. Consequently there is a risk of burns. Take

care when fitting temperature sensors!

►

For safety reasons, the system should only be left in manual mode when testing. In this

operating mode, no maximum temperatures or sensor functions are monitored.

►

Safe operation is no longer possible if the controller or connected equipment exhibits visu-

al damage, no longer functions or has been stored for a lengthy period of time under un-
suitable conditions. If this is the case, place the controller and equipment out of service
and secure against unintentional use.

Maintenance:

The system does not require maintenance if handled and used properly. Use a cloth mois-

tened with soft alcohol (such as spirit) to clean. Do not use cleansers and/or solvents such as
trichlorethene.
As none of the components relevant to accuracy are under loads when used properly,
they have a long service life without much drift. The unit thus does not have any adjustment
options. No adjustments are needed.
The design characteristics of the unit must not be changed during repairs. Spare parts
must correspond to the original spare parts and be as good as new.

«
...
3
4
5
6
7
...
»

Summary of Contents for UVR 64

































































Reviews:

No comments

Related manuals for UVR 64

Brand: D-Link Pages: 113

Brand: D-Link Pages: 146

Brand: Samson Pages: 92

Brand: Jafar Pages: 10

VLT AutomationDrive FC 302

Brand: Danfoss Pages: 128

VLT DriveMotor FCP 106

Brand: Danfoss Pages: 4

Brand: K1EL Pages: 46

Brand: Paradox Pages: 2

Brand: Paradox Pages: 44

PowerFlex 755 IP00

Brand: Allen-Bradley Pages: 78

Brand: Absima Pages: 5

PDS CONTROL Series

Brand: S&P Pages: 32

Brand: Watlow Pages: 20

Brand: DAQ Pages: 63

Brand: TeleMann Pages: 4

Brand: Zero 88 Pages: 34

750-429/040-001

Brand: WAGO Pages: 52

XDOM TAKE 6 IR/RF - PRODUCTSHEET

Brand: Ebode Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands