7
Operating Instructions.
Before driving:
WARNING!
TA Indoor Wave is not intended for users with a weight exceeding 120 kg
WARNING!
TA Indoor Wave should be turned off when making entry and exit of the chair and when assisted by a
helper, so that the chair does not accidentally run if the joystick is activated.
Footplate / foot rests can usefully be looked up to facilitate the entry and exit.
Before you use TA Indoor Wave, check the following:
- The chair's
speed
is sufficiently low.
- Any
footrests
are properly mounted and locked so they do not swing out while driving.
- The
seat lift
is set at the lowest possible level and the
seat tilt
is as close to horizontal (neutral) position as
possible.
NB!
When the seat is raised above 8 cm, the seat can tilt max 8 °. If the seat is not lifted higher than 8 cm,
the seat can be tilted fully (30°).
When the seat is tilted more than 8° the seat can max be lifted 8 cm. If the seat is not tilted more than
8°, the seat can be lifted fully (30 cm)
By seat lift more than 8 cm or by seat tilt over 8° reduces chair speed automatic with 50%.
The first drives in TA Indoor Wave should be conducted where there is plenty of room around the chair and
the chair's speed should be low.
While driving:
TA Indoor Wave's driving characteristics including: braking, maximum speed and acceleration can be set to
suit the individual needs.
Setting the chair's driving characteristics is performed by TA Services A/S.
TA Indoor Wave is switched on by a light pressure on the Power button.
The chair's speed is increased by pressing the speed-up button.
The chair's speed is decreased by pressing the speed-down button.
WARNING!
Do not reach into or under the chair when the seat lift and seat tilt is activated because there is a risk of
entrapment between the mechanical parts.
WARNING!
Be aware of others, especially children, is too close to the chair when the seat lift and seat tilt is activated.