18
Troubleshooting
.
Problem:
Cause:
Solution:
The chair cannot run
1. Charging connector is connected
to the control box.
Remove the charging plug.
2. Motor brake is disengaged.
Connect the motor brakes.
3. Other cause.
Contact authorized service center.
The chair drives slowly.
Symbol appears in display
1. Speed Lower transferee is
activated because of lifted and/or
tilted seat.
Lower the seat and /or tilt the seat
back to nearly horizontal.
2. Other cause.
Contact authorized service center.
Symbol appears in display
1. The system has reduced power
to the engines to prevent
overheating.
Stop running and let the engines
cool.
The engines were overloaded and
exposed to more load than they are
intended for.
2. Other cause
Contact authorized service center.
Symbol appears in display
1. Control system was too hot and
has reduced the impact.
Turn of the chair and let it cool off.
2. Other cause
Contact authorized service center.
Symbol appears in display
1. The system has generated an
error and displays a text, module
and an error code.
Contact authorized service center.
Symbol appears in display
1. Joystick activated
If you activate the joystick before
or just when you turn on, the
symbol will blink.
Release and center joystick to use
the chair.
If the joystick is not released and
centered within 5 seconds, the
chair will not run, even though the
joystick is released. Power cycle
the chair again to use the chair.
1. joystick is locked
See "lockdown joysticks" to lock
the joystick up.
CHARGER:
See enclosed instructions for
charger
WARNING!
Repairs must be performed by TA Service A/S or repairer who is authorized by TA Service A/S
Only original parts or parts that are approved by TA Service A/S can be used.