11
Setting the power functions
The wheelchair may depending on model have the following power
functions:
Seat lift
Seat tilt
Back
Right legsupport
Left legsupport
The functions are activated by pressing the "Mode" button on the
control box, then there's a picture of power features. Find the function
to be used by flipping the pages of the control stick. When the feature
is found, activate it by taking control stick forward or backward,
depending on which way the function should run.
Note:
When the seat is raised above 8 cm, the seat can tilt max 8 °. If the
seat is not lifted higher than 8 cm, the seat can be tilted fully (30°).
When the seat is tilted more than 8° the seat can max be lifted 8 cm. If
the seat is not tilted more than 8°, the seat can be lifted fully (30 cm)
By seat lift more than 8 cm or by seat tilt more than 8° reduces chair
speed automatic with 50%.
WARNING!
Do not reach into the chair when the seat lift and seat tilt is activated because there is a risk of entrapment
between the mechanical parts.
WARNING!
Be aware of others, especially children, is too close to the chair when the seat lift and seat tilt is activated.
