18
Index
DL inputs
A value can be read out from the FRISTAR3 controller via a DL input on the controller. The index of
each value is fixed:
DL outputs
A value can be given to the FRISTAR3 controller via a DL output on the controller. The index of each
value is fixed:
For UVR67
In the expert level under "Ext. sensors", DL bus is specified as the source for
one of the inputs and the DL address of the FRISTAR3 controller is specified.
The required index according to the table on the previous page should be en
-
tered underneath.
Index: Measurement:
1
Actual DHW temperature T
ww
[°C]
2
Cold water temperature T
KW
[°C]
3
Flow rate [l/h]
4
Primary temperature T
Pri
[°C]
5
Circulation temperature [°C]
6
Set temperature [°C]
7
Pump output [%]
8
Valve position [%]
9
Current output [kW]
10
Total energy [kWh]
11
Total energy [MWh]
12
Water meter [m
3
]
13
Status (see "Status" on page 17)
Index: Measurement:
1
Set temperature [°C]
2
Forced DHW circ. [On/Off]
3
Pause time DHW circ. [s]
4
Set temp. DHW circ. [°C]
