1
39
SAFETY BELT
Make sure no objects get stuck under the
belt! – This prevents unpleasant pressure
points.
Aftermarket installation of a seat belt
must only be done by an authorised re-
pair centre.
The belt must not be used as a restraint
system for securing either the user or the
wheelchair during transport in a motor
vehicle.
The belt is screwed into place on the out-
side of the chair with 8 mm bolts (1).
The safety belt is designed to stabilise your
sitting posture and prevent you from tum-
bling forward out of the wheelchair.
When fastening the safety belt, pull both
ends forward and fit them into the buckle
until you hear an audible click.
To open the safety belt, press the release
button and pull the ends of the belt away
from one another.
☞
The safety belt can be loosened and
must not sit too tight.
MDR,
not
final
version