Assembly
Preparation
Connect the cable to the LineCrypt according to the connection scheme.
Fig. 2: Connection scheme, LineCrypt DSL
Plug the connection to your internal network into the 10BaseT internal socket.
The connection to InternetGateway is made via the 10BaseT
external socket. As the pin assignment of the Ethernet socket corresponds to
the pin assignment of a network card, the following applies for the cable to be
used:
•
Use a crossed cable when connecting to a network card (e.g. PC).
•
Use an uncrossed cable when connecting to a hub or an Ethernet switch.
Contact
Line
1,2
Transmission lines (LineCrypt
transmits)
3
Not used
4,5
Reception lines (LineCrypt receives)
6,7,8
Not used
Table 1: Allocation of the RJ-45 plug
If you wish to manage the LineCrypt DSL locally, plug the PC cable into the
mini DIN 8 socket ”[ ... ]” for the local management.
7
LineCrypt
T−TeleSec
local management
PC
V.24
110 ... 230 V
Hub
Internet
10BaseT
10BaseT
Modem
external
internal
