Operation
Operation
LED on the top side
On the top side of the LineCrypt there are three multi-colored light-emitting di-
odes (LED), which are labeled, On, I and II.
The On LED signals the ready status of the equipment. The I LED serves to dis-
play the data traffic on the network. The II LED serves to display key exchanges
and faults in the equipment management.
LED On
Green light
No Chip card plugged in
Orange light
Valid Chip card plugged in
Orange blinking
1x
Authorization file/configuration missing
2x
3x
4x
5x
Problem with the Chip card.
Recovery: Plug Chip card in properly, or
change Chip card (TeleSec NetKey Card 2.x)
8x
9x
Internal error detected during self-test
LED I
Red blinking
Encrypted data traffic
Green blinking
Unencrypted data traffic
LED II
Orange light
Key exchange in progress
Green light
Key exchange successful
Red light
Key exchange failed
Orange blinking
Configuration fault
Red blinking
Configuration fault
13