ATP/ASP/ASUP Price computing scales operation manual
REV: C1, June 2012
ATP/ASP/ASUP Price computing scales operation manual
5. 3 Account operation
After do accumulate operate, you can press
ACCOUNT
key,
WEIGHT window will show the summed price, key in paid
money by keyboard, this will show on Unit Price window, and the
Total Price window will show the return value.
Press
TARE
key to return normal weighing mode and clear
memory, if you don’t want clear memory, press
ZERO
key to
return normal weighing mode.
Note: if you haven’t do accumulate operation, you also can use
Account function, the summed price is current total price.
6. UNIT PRICE MEMORY
scale can store 10 sets unit price.
6. 1 Save the unit price
Hold the
PLU
key for 3 seconds after you key in the unit price, it
will show “
save pos
” , press numeric key 0~9 to select which
memory location you want to use. After you do, the unit price is
stored in the scale.
6.2 Load the unit price
If you want to use the unit price stored in the scale, press
PLU
key, scale
will shows “
load pos
”, press numeric key 0~9 to
select which memory location’s price you want to use, current
unit price will change to the value stored in the memory.
6. 3 use direct PLU (only ASUP)
to store current unit price in direct PLU, just hold direct PLU key
(P1~P30), to call out PLU, just hit direct PLU key (P1~P30)
-4-
1. INTRODUCTION
◆
Large LCD display
◆
AC / Rechargeable battery
◆
Selectable weighing unit
◆
Accumulate operation
◆
Account function, do memory recall, give change and memory
clear at one time
◆
Selectable reading resolution
◆
Auto backlight
2. KEY DESCRIPTION
Each of the keys are shown and described for you.
ZERO The
ZERO
key zeroes the scale.
TARE The
TARE
key subtracts tare values and scale from gross
mode (no tare) to net mode.
SAVE The
SAVE
key used to disable or enable the price and tare
auto-clear function.
B/L The
B/L
key used to set the backlight mode (ON/OFF/AUTO)
ACCOUNT The
ACCOUNT
key is used to do memory recall, give
change and memory clear
M+ The
M+
key adds data to the accumulators.
UNIT The
UNIT
key is used change unit.
PLU The
PLU
key used to store unit price memory and recall unit
price from memory (indirect memory)
C The
C
key is used for canceling the memorized and input
data.
0~9 The
NUMERIC
key (0~9) is used for setting unit price data.
·
Decimal Point key is used to set the decimal of the unit price
P1~P30 store the unit price.(direct PLU key, only for ASUP)
-1-
