REAR PANEL
Input - Jack input from an instrument, Effects pedals or Line signal.
Balanced input - XLR input.
Output - Jack output to amplifier etc.
Balanced Output - XLR Output.
Power In
24 Volt DC - 300 mA. Use the original Binson Echorec Power supply!
The power supply comes with four different switch blades, USA, Europe, Australia, and
the UK.
EXP. Pedal, speed control
For players who want to use an Expression pedal to control the speed of the revolving
drum. +/- 20%.
Bypass
External Bypass control on/off. Use a momentary switch to control the bypass.
Playback Level
Access to Playback Level adjustments, 1 to 4. Use a flat tipped mini screwdriver.
Repeat
Controls the number of repeats. The number of repeats depends on the revolving
drum speed!
Selector switch for Repeat or Swell
In the Repeat position, the unit works like a regular echo unit with an adjustable
number of repeats determined by the Repeat control. When selecting one or more of
the Playback heads, the level will change, and therefore the Repeat control must be
adjusted.
Swell is like a semi-reverb, where all four Playback heads are engaged.
If all four Playback heads are switched off, the swells come without Repeats.
The Swell works independently of the selectors, Playback 1 to 4!
Tip! You can switch on Head 1 to 4 to experiment with different repeats on the Swells.
Echo Tone
The Tone control is an adjustable roll-off of the hi-frequencies.
Tip! With a faster revolving drum speed, the higher frequencies will be much more
pronounced. You can dial the Tone Control CCW (counter clockwise) to roll them off.
Bypass Control light and switch
You will see a green light when switching on the unit.
If you hold down the Bypass switch for over 2 seconds, the drum will stop turning in
Bypass mode.
Summary of Contents for BINSON ECHOREC
Page 1: ......
