background image

The REPEAT -knob controls the number of repetitions of the delay signal.
- In minimum position the delay signal is only repeated once
- In maximum position the delay signal is repeated to almost infinity

The TEMPO -knob sets the delay time. When power is connected to the pedal, it reads the setting of the 
TEMPO knob, which determines the delay time until adjusted using the knob or the TAP TEMPO switch.
Minimum delay time is approx. 12 milliseconds. Maximum delay time is approx. 1500 milliseconds. The 
LED indicator below the TEMPO inscription indicates the delay time. When the TEMPO -knob is turned 
while playing, the delay signal is muted.

The TAP TEMPO -footswitch enables you to tap the delay time while playing. Just hit it twice.

The SUBDIVISION -button generates quarter-note triplets of the tapped or dialled-in tempo. First you hit 
the button, then you tap the beat on the TAP TEMPO switch. When the beat of a song goes 1-2-3-4, the 
echo goes 1-2-3. That’s called triplets. That’ll keep the echo of the guitar a lot clearer. It is easier to hear this 
SUBDIVISION function using a drum machine keeping the beat 1-2-3-4.

The BROWN -button is a High-Cut filter that alters the tone of the repeats. The result is a warmer, 
smoother delay sound reminiscent of the tone of a 60´s era tape echo.

The MIDI - socket allows you to control following:
TAP/TEMPO (CTL. No. 20), ON/OFF(Bypass) (CTL No. 21)

Size: 

 

 

Box 100x12 Switches/knobs on top 16mm + Knobs on bottom 3mm

Controls: 

 

ECHO, LEVEL, REPEAT and TEMPO.

Modes:  

 

SUBDIVISION and BROWN

External control: 

MIDI IN

Connections:   

INPUT-Jack 6,3 mm. OUTPUT-Jack 6,3 mm. DIRECT OUTPUT-Jack 6,3 mm.

Power supply:   

The pedal comes with an external power supply giving 12 volt AC and 300 mA.

 

 

 

The power supply runs on 100/115/230V AC/50-60Hz dependant on country.

Effect usage:   

12 volt AC, 300 mA, 5 Watts

Weight:  

 

727 gram packed in box + power supply packed in box 275 gram

 

T-Rex Engineering ApS, Tel.: +45 75 72 71 81, Fax: +45 75 72 71 98

www.t-rex-engineering.com, mail: [email protected]

Issued in Vejle October 21th 2004

Sebastian Jensen

Managing Director

Lars Dahl-Jørgensen

Managing Director

Summary of Contents for BETAVIBE












Reviews: