The SLOW/FAST, TAP TEMPO footswitch has 2 functions:
1)
TAP TEMPO (works only with the MODE button in “up”-position) enables you to tap
the modulation speed while playing
2)
SLOW FAST (works only with the MODE button in “down”-position) lets you increase
or decrease the modulation speed fluently, -exactly like a real Leslie rotor. Press the
footswitch and the speed will slowly increase to the setting of the SPEED knob, press the
footswitch again and the speed will decrease to the slowest speed of the pedal.
The MIDI button controls whether the pedals should react on a MIDI signal (via the MIDI socket
on the side of the pedal), or the pedal should react on manual settings on the SPEED knob and
the SLOW/FAST, TAP TEMPO switch:
- In “up” position the BetaVibe acts as a typical floor pedal. Knobs and footswitches can be used
- In “down” position you can only via MIDI control following parameters:
1)
TAP TEMPO (CTL. No. 22)
2)
SPEED EXPRESSION PEDAL (CTL. No. 01)
In “down” position the SPEED knob and the SLOW/FAST, TAP TEMPO footswitch is deactivated.
The modulation speed is only controllable via MIDI.
3)
ON/OFF (BYPASS) (CTL. No. 23)
Controls:
MIX, VOLUME, DEPTH and SPEED.
Modes:
MODE and MIDI
External control:
MIDI IN
Connections:
INPUT-Jack 6,3 mm. OUTPUT-Jack 6,3 mm.
Power supply:
The pedal needs 12 volt AC. It has an internal power supply dependant
on the electricity in a given country: 100, 115 or 230V AC/50-60Hz
Effect usage:
100 mA. 3,7 Watts
Weight:
750 gram packed in box
T
-Rex Engineering ApS, Tel.: +45 75 72 71 81, Fax: +45 75 72 71 98
www.t-rex-engineering.com, mail: [email protected]
Issued in Vejle October 21th 2004
Sebastian Jensen
Managing Director
Lars Dahl-Jørgensen
Managing Director
