CONNECTIONS
Input: Connect your instrument or signal source to this jack
Output: Connect the amplifier or receiving unit to this jack
DC inlet: Connect a power supply unit to this jack (9/12 VDC, center
negative, 130 mA min.)
Controls:
Mix
: Controls the mix of the dry signal vs. the two octave signals.
Turn this clockwise for more overall octave volume and less
dry signal. Turn this counter clockwise for less octave and
more dry signal.
Lo A
: Controls the level of the low octave for ch. A
Hi A
: Controls the level of the high octave for ch. A
Lo B
: Controls the level of the low octave for ch. B
Hi B
: Controls the level of the high octave for ch. B
CONGRATULATIONS
On your purchase of the T-Rex 8-ball pedal!
Delivering 2 channels of polyphonic octave generation, you can foot-
switch between two separate blends of dry signal, low octave and high
octave.
For instance, you may want to add a little high octave “shimmer” to
lead lines and use plenty of low octave for powerful riffing. Or maybe
your music demands two levels of octave generation – a little and a lot.
The 8-ball allows you to set up each channel for the exact amount of
octave signal(s) and you can then easily go from one to the other.
The 8-ball uses a polyphonic, fast tracking DSP engine to generate the
octave signals but your dry, unaffected signal remains analog and is
buffered when the pedal is bypassed.
