T.O.M XQ 1600, Operation Manual

Page: 65 / 97

65
Remote Set Up <Camera>
Enable : Selection item to use camera, Removing the check stops using that channel.
No : Item to select camera No
To set up all the camera equally, Choose “select all”
Security : When checked, It displays ‘Hidden’ on monitor. (though it keeps recording)
Title : Item to revise/type the camera name.
PTZ address: Item to assign PAN TILT address per camera.
Name :Item to check PTZ Camera’s model name.
ID : Item to select PTZ address per camera.
Port bit rate : Item to select the PTZ’s port bit rate.
Data bit :Item to select data bit.
Stop bit : Item to select Stop bit.
Parity : Item to select Parity.
Link PTZ : Sets up PTZ camera.
Audio : Item to select which audio channel to be used among total 4 audio inputs.
1
2
3
4
1
2
3
4
Chapter VI