T-Mobile Pulse, User Manual

Page: 9 / 185

Getting to Know Your Phone
4
following figure.
1. Remove the battery cover.
2. Insert the SIM card.
Installing the Battery
Insert the battery by first placing side a (with contacts) at the bottom
position and then smoothly pushing down side b. The printed side of
the battery must be facing upwards.
Charging Your Phone
Before you charge the battery, read the following instructions:
Note:
• If your phone battery has not been used for a long time, you may
not be able to switch on your phone immediately when recharging
the battery. Charge the battery for a while to recover the battery
from deep-discharged status. When your phone is being charged,
the keypad light flashes.
• The battery can be recharged but eventually will loose capacity
over time and charging cycles. After being fully charged, if the
battery lasts for a period that is significantly shorter than usual,
replace it with a battery of the same type.
• Using data services will reduce your standby time significantly.
1 2