T-Mobile MDA Touch Plus, User Manaul, Page: 88 / 268

Plus Using Phone Features
88
1.
On your device, make sure that Bluetooth is turned on and set to visible
mode. For information about turning on Bluetooth and enabling visible
mode, see “Bluetooth modes” in Chapter 0.
2. Tap Start > Settings > System tab > SAPSettings .
3. On the BT Remote SIM Access screen, select the Remote SIM Access
check box then tap Done .
4. Connect the car kit phone to your device via Bluetooth. To learn how to
connect, consult your car kit phone’s manual.
5.
If this is the first time you are pairing the car kit phone with your device,
enter the car kit’s passcode on your device.
6. A pop-up message should appear on your device saying that a
connection has been established between your device and car kit phone.
Tap
OK .
7. On the BT Remote SIM Access screen, tap Done .
Note You will not be able to make/receive calls, send/receive messages or
perform related activities on your device when the SIM Access Profile
connection is active. You’ll be able to do all these from the car kit
phone during this time. After the connection is disconnected, you will
be able to use your device as before.