Summary of Electric Part
Tundra
Summary of Electric Part
Wired magnetic induction
module arrangement
Power board
switch
Battery
Signal wire
arrangement
Motor wire
arrangement
Controller
g
arrangement
Motor wire
connection
Pull signal wire and Power board switch into the vehicle
connection
Step 10 : Check out the Power board switch of controller to make sure it is off. Insert back the fuse , arrange
the wire harness in order. Check if all the wires are connected well and test if the power board can work
normally . If it can work normally ,the board installation is completed. (If it can not work normally , please
check the completeness of installation of each part.)
www.tmax.biz
21
