Tundra
A -pillar panel
White signal wire
Brown signal wire
power board switch wire
Sill
l
g
Sill panel
Power board
switch
Figure 2
Figure 1
Figure 3
Step5: Connection of signal wire: Pry the sill panel and A-pillar panel in figure 1. Pull the white signal
wire , brown signal wire and power board switch wire into the vehicle through the rubber grommet on
the left side of the vehicle in figure 2. Then the white signal wire extends to the right side of the vehicle
17
www.tmax.biz
under the carpet, and stick the power board switch to the left side under the steering wheel in figure 3.
