21
To o l s R e q u i r e d :
UÊ ÊÊiÌÀVÊ«ii`Ê
wrench set
UÊ Ê`ÕÃÌ>LiÊÜÀiV
UÊ Ê-ÌÀ>«ÊÜÀiV ÊÀÊÃvÌÊ
jaw vise
UÊ Êi`ÕÊy>ÌÊ i>`Ê
screwdriver
UÊ ÊiÌÀVÊ iÝÊÜÀiV ÊÃiÌ
CAUTION:
Before any service is performed on a T-MAG™ pump, all electrical lines
must be disconnected and all process fluid drained from the pump. DO NOT open the
pump connections if process fluid pressure remains inside the pump. Use the liquid
end drain plug to drain remaining fluid from the impeller chamber.
NOTE:
The model shown in this example represents all five sizes of T-MAG™ mag-
drive pumps.
Step 1
Before disassembly, mark motor,
mounting bracket and pump head to
ensure proper configuration during
reassembly.
Step 2
Using a metric wrench, remove all
liquid end bolts from pump head.
Step 3
Carefully remove the outer liquid
casing from the central mounting
bracket. Do not twist or rock the
liquid end to assist with removal.
This will place unnecessary torque
on the shaft and may damage it.
S e c t i o n 7
P U M P D I S A S S E M B L Y
Summary of Contents for AMX Series
Page 29: ...27 N O T E S...
Page 34: ...32 N O T E S...
