T-Link TL300, Quick Install Manual

Page: 3 / 3

Quick Install Guide
NOTE: A restart is required for the programming changes to take effect. Allow up to 15
seconds for a restart.
All additional programming is done through the TLink Console Software. Please see the TLink
Console software manual for and further programming instructions.
Specification
Input Voltage 12 VDC
Input Current
T-LINK TL300 Max current draw: 360mA
Dimensions 3.25” × 5.25” (8.3 cm × 13.3 cm)
Operating
Temperature 32°-122°F (0°-49°C)
Output Protocols UDP/IP 10/100 BaseT half duplex
Input Protocols
Contact ID protocol
Digital Inputs 4-digital inputs (can be increased to 12 using the PC5108)
Connectors
4-pin header for the PC-Link and RJ-45 for Ethernet, DVACS adaptor
(DVACS kit only)
Programming Panel keypad, console on the RS232 or remote T-Link console
Network Ethernet LAN/WAN 10 BaseT or 10/100 BaseT
E-mail sends alarm messages to maximum 2 E-mail addresses
Downloading Support
for DSC Panels DLS-3 and/or System Administrator software
Multiple Central
Stations
primary and backup via phone line
(
NOT available for DVACS installations).
Call Direction Options primary or backup communicator using panel call direction
(
NOT available for DVACS installations).
Approval Listings UL (Grade of Service AA, Encrypted Line Security)
ULC (Signal Channel Security Level 4/5)
FCC, IC, CE