T.I.P. SSI 600 LED, Translation Of Original Operating Instructions

Page: 9 / 56

2
4. Technical Data
Model SSI 600 LED
Operating voltage 6 V DC
Rated power pump 0.8 Watt
Protection class pump / protection class LED spotlight IPX8 / IPX8
Max. flow rate (Q
max
)
1)
150 l/h
Max. delivery head (H
max
)
1)
0.8 m
Fountain height ~ 30 cm
Max. Temperature of the pumped liquid (T
max
) 40 °C
Battery pack 3.7 V
– 2000 mAh Li Ion
Weight (net) ca. 0.8 kg
Range remote control max. 10 m
Item number 30335
1) The values were determined with free, unreduced outlet.
5. Scope of delivery
Floating solar island with solar panel and LED lighting (1), battery operated pump (2), four different fountain
attachments (3), remote control (4), operating instructions.
6. Mounting / Dismounting
Important! The pump must not run "dry". Otherwise damage to the device cannot be excluded!
The figures mentioned in the following text refer to Fig. I, Fig. II and Fig. III at the end of the operating instructions.
•
Unpack all components carefully.
•
Mount the pump on the pump connection (7).
•
Then remove the plug from the power connection socket (8) and plug the power cable of the pump into it.
Make sure that the plug is absolutely tight.
•
Now turn the SSI upside down and select a suitable fountain attachment (3). Now your floating island is ready
for use.
•
Please make sure that the SSI is not completely submerged in water - it may only float on the water surface.
The polystyrene float (5) is used for this purpose.
7. Putting into operation
Observe safety measures!
The connecting cables of the device must not be damaged!
The battery must be fully charged before switching on the device!
7