Translation of original operating instructions
2
2. Range of use
These for special applications developed flat suction submersible pumps from T.I.P. are highly efficient electrical
pumps for discharging clear, clean or moderately dirty water containing solids up to the maximum size specified in
the technical details. These high-quality products with their convincing performance data were developed for the
multiple purposes involved with irrigation, draining and pumping liquids from one place to another.
The typical ranges of application of FlatOne pumps include: draining of pools, basins and storage containers
thanks to low suction function the draining from rooms.
This product is intended for private use in the home area and not for commercial or industrial purposes or for
continuous circulating. The device is not suitable for use in swimming pools when people or animals are in the
water or for installation in public water mains. The pump is not suitable for use in table-top fountains, aquariums
or similar ranges of use.
The pump is not suited to discharge saltwater, faeces, inflammable, etching, explosive or
other hazardous liquids. Please observe the max. temperature of the liquids to be discharged
stated in the technical data.
Inside the pump, lubricants are used which may contaminate the liquids being discharged in
case of any improper operation or damage of the device. The lubricants used are biologically
degradable and non-hazardous to health.
3. Technical Data
Model
FlatOne 6000 INOX
Mains voltage / frequency
230 V~ / 50 Hz
Nominal performance
300 Watt
Protection type
IPX8
Pressure port
IG 39,59 mm
(1 ¼ “)
Max. flow rate
(Qmax )
1)
6.000 l/h
Max. pressure
0.6 bar
Max. delivery height
(Hmax)
1)
6 m
Max. submersion depth
7 m
Max. size of the solids being pumped
1 mm
Max. fluid temperature (Tmax)
35 °C
Max. cut-in frequency in one hour
30, evenly distributed
Length of connection cable
10 m
Cable type
05RN8-F
Weight (net)
~ 4.3 kg
Min. self-priming level in manual operation (A)
2)
40 mm
Min. evacualtion level in manual operation (B)
2)
1 mm
Starting level in automatic operation (C)
2)
420-270 mm
Cut-out level in automatic operation (D)
2)
30-160 mm
Dimensions (L x D x H)
15.5 x 15.5 x 25 cm
Item no.
30440
1)
2)
The values were determined with free, unreduced outlet.
The values between brackets refer to the illustrations given at the end of these operating instructions.
4. Scope of delivery
The scope of the delivery of this product includes:
One pump with connection cable, one multi-dimensional connection port, one check valve (non-return valve) pre-
mounted to the pressure port, one operating manual.
Please verify that the scope of delivery is complete. Depending on the purpose of the application, additional
accessories may be necessary (please refer to the chapters titled "Installation"
and “How to order spare parts“).
If possible, keep the packing until the warranty period has expired. Please dispose of the packing materials in an
environmental-friendly manner. The materials used are completely recyclable.
9
