background image

6

EN

• You can use the appliance with or without the accessory. 

(Fig.5 to 8)

• Hang the creased garment on a clothes hanger.
• Pull the garment tight with one hand far from steaming area and place the appliance on the

creased area, beginning at the top of the garment.

• For steam, apply press on steam trigger. 

- fig.8

• The combination of steam and fabric brush will gently remove the creases.
• After treatment, let the garment cool down on the hanger before wearing.

Lint pad 

Threads, lint and hair can easily be removed with the lint pad by brushing the clothes slowly
up & down.
The pad can be cleaned by brushing in the opposite direction down & up on a piece of old
cloth.

• Unplug the appliance. Empty the water remaining in the tank and leave unit on its side to

cool.

After  the  appliance  has  cooled  down  (minimum  one  hour),  it  may  be  stored  in  the  bag
provided or hang by rear hook.

As  steam  is  very  hot:  never  attempt  to  remove  creases  from  a  garment  while  it  is
being worn, always hang garments on a clothes hanger.

Tips: Check the fabric’s label for recommendations. We recommend that you test fabrics
in an inconspicuous area to ensure these fabrics are not damaged by hot steam.

Do not touch silk or velvet with steam head. Some articles can be steamed better from
inside.  Heavier  fabrics  may  require  repeated  steaming.  Exercise  caution  at  all  times.  To
avoid damage on clothes, keep a distance of 1.5 inches between the steam head and the
fabrics. We recommend that before the first use or after the appliance has been stored for
some time to test the burst of steam on an old garment.

The lint pad must not be used when attached to appliance.

AFTER USE

Warning: Never store the appliance until the steam head and unit cools completely.

Warning: never forget to unplug the steam brush and empty the water in horizontal
position after your ironing session. While not in use, you can hang your steambrush
by its hook. Wait for an hour before hanging.

Please note that water can come out of the inlet cover if you hanging it vertically.

9100017919-01 DV86XX U1.qxp_110x154-9100017919  30/03/15  14:12  Page6

Summary of Contents for STEAM N PRESS DV86 Series




























Reviews: