T-Fal Actibread, Instructions Manual, Page: 10 / 26

10
7. Rapid bread. Program 7 is specific to the Rapid bread recipe. Bread made using fast programs is more
compact than that made with the other programs.
8. Rapid sweet bread. This program is similar to the Sweet bread program but is quicker. The texture of the
bread may be a little more compact.
9. French bread. The French bread program corresponds to a traditional french crusty white bread recipe.
10. Sweet bread. The Sweet bread program is for recipes containing more sugar and fat such as brioches and
milk breads. If you are using special flour blends for brioche or rolls, do not exceed 1.5 lbs of dough in total.
11. Cooking only. The Cooking only program allows you to bake for 10 to 70 minutes (adjustable in increments
of 10 min). It can be selected alone and used:
a) with the Bread dough program,
b) to reheat cooked and cooled breads or to make them crusty,
c) to finish cooking in case of a prolonged electricity cut during a bread baking cycle.
The breadmaker
should not be left unattended when using program 11. To interrupt the cycle before it is finished, the
program can be stopped manually by holding down the button.
12. Bread dough. The Bread dough program does not bake. It is a kneading and rising program for all leavened
doughs such as pizza dough, rolls, sweet buns.
13. Cake. Can be used to make pastries and cakes with baking powder. Only the 1.5 lbs setting is available for
this program.
14. Jam. The Jam program automatically cooks jams and compots (stewed fruits) in the pan.
15. Pasta. Program 15 only kneads. It is for pasta dough, like noodles and gluten-free pizza dough for example.
Selecting the weight of the bread
The bread weight is set by default at 2 lbs. This weight is shown for informational purposes. See the recipes for
more details.
Programs 1, 2, 3, 11, 12, 13, 14, 15 do not have weight settings.
Press the button to set the chosen product - 1 lb, 1.5 lbs. or 2 lbs. The indicator light against the selected
setting will come on.
Selecting the crust color
By default, the color of the crust is set at MEDIUM. Programs 12, 14, 15 do not have a color setting.
Three choices are possible: Light / Medium / Dark.
If you want to change the default setting, press the button until the indicator light facing the desired
setting comes on.
Start /Stop
Press the button to switch the appliance on. The countdown begins.
To stop the program or to cancel delayed programming, hold down on the button for 3 seconds.