15
Installing the Parking Surveillance
Notice
●
Each vehicle has its own system and features. Please conduct this manual for the installation as a reference.
●
Please ignition off while installing the parking surveillance and contact the car technician if needed.
●
In order to use parking surveillance, cigar lighter power plug should be cut and use the cable for the wiring.
Each part of T-BOX
1 RED
POWER SUPPLY VCC (+)
POWER SUPPLY (+12V ~ +24V)
2 WHITE
ACC (Ignition)
ADR3320 signal for operation
3 BLACK
GND (-)
Connect to the ground
1. Connect the black wire (GND)(-) with car frame
or ground wire.
2. Connect the red wire(power supply cable)(+)
with all-time power supply cable. For this power
supply, it should be powered on after the ignition is
off. For instance, Emergency button has the power
supply without ignition.
3. Connect the white wire(ING) with the power
cable which can have the power with the ignition
only. For instance, the cigarette lighter cable has
the power while the ignition is ON only
CAUTION!
●
For the safety reason, while installing the parking surveillance, please connect the ground
wire first.
●
Please connect the power cable and ACC(Ignition) cable through the fuses inside.
