2
Main Features
Unlike other in-car recording systems, the Drive Recorder is used to record both video and audio
data in a continuous loop fashion. If the vehicle is involved in an accident such
as a collision, impact,
and sudden acceleration-related incident, this data is marked and stored. One may thereafter
analyze the data to find its root cause by playing back the scenes of interest and where acceleration,
vehicle speed, direction, and location are available for review. Added to the recording are vehicle
speed and direction and GPS location.
Continuous recording
The video and audio data from the front and interior views is continuously recorded while power on.
When the capacity of the SD card has been reached, the oldest files are overwritten by the latest
ones in a “round-robin”, first in, first out fashion.
Emergency recording
When impact or unusual acceleration or deceleration is detected by the built-in G-Sensor and has
exceeded the preset limit or one activates the manual emergency record button, the recorded
video data is locked-in and is erased only by an authorized party and by using a PC or laptop,
accessing the SD card. Emergency data records 1 minute before and 1 minute after
Even if Emergency recording creates NOT overwritten data, if the number of emergency data
exceeds the capacity of SD card, the first emergency data file will be overwritten and then saves the
data.
(
Note
: The User may set the pre-event time to either 1 minute, 2 minutes or 3 minutes of
pre-event recording).
The next time the SD card is read by the unit, the unit’s set up parameters will be uploaded into the
recorder. As previously mentioned, stored event recording data in the SD card will not be erased by
the unit, and where this must be done manually by the user.
Night view recording with Infra-Red Light
The included IR (Infra-Red) Light module with adjustment used this invisible light source to assist in
recording nighttime views from the interior facing camera.
Playback of video/audio data
The recorded data can be played back using the provided playback soft ware which resides on the
SD card. By removing the SD card and accessing the Player folder and double clicking on the
“Player.exe” line starts the playback soft ware.
Data analysis
The recorded data can be easily analyzed for speed, vehicle location and direction of travel including
impact by using the Player that is found on conveniently on the supplied SD card.
Record speed & location
Driving at the time of the accident using GPS location, time, speed, and can save you
can check via the supplied Player program (viewer program).
