PORTABLE
COLLARING SYSTEM
9
PLUS 115
3. T-DRILL PLUS 115, GENERAL
Your T-DRILL PLUS 115 is a special purpose portable collaring system unit which, when
used with the T-DRILL T-65 power tool and (specially designed) T-DRILL collaring heads,
is capable of producing a range of branch connections sizes 48,3 - 114,3 mm / 2” - 4” in
stainless steel tubing.
Before attempting to put your PLUS 115 into service make sure you have read and fully
understood the safety instructions that apply to all power tools and the capabilities and
limitations of this special tool.
The PLUS 115 must be used with the T-DRILL T-65 grounded power tool with it’s own
connecting cord and a foot pedal for controlling of the T-65. This is because, when milling,
the other hand drives the ellipse and the other is needed for lubricating the milling pin.
The T-DRILL PLUS 115 is intended primarily for use on stainless steel tubes.
For an introduction video, see T-Drill website:
https://t-drill.fi/plus-115-ss-portable-collaring-system-for-stainless-steel/
or scan the QR code:
3.1 TECHNICAL DATA
PLUS 115 for stainless steel
Value
Type code
7005
Run tube sizes
60,3 - 219,1 mm (2 ½” - 8”)
Collar sizes
48,3 - 114,3 mm ( 2” - 4”)
Run tube materials
Steel, stainless steel
Weight
68 kg
