6
08.12.2006
KA_GB_154_stick.fm
mum of 32 characters). Then enter the specified number of the code which is used in the network in
the Standardschlüssel (default key) field.
4
Click the
Übernehmen
(Apply) button.
If WPA-PSK is being used in the WLAN:
1
Click the
opening arrow
next to Verschlüsse-
lung (Encryption) and select the
WPA-PSK
option in the menu.
2
Click the
opening arrow
next to Verschlüsse-
lungsart (Encryption type) and select the encryp-
tion type in the menu:
TKIP
or
AES
.
3
Enter the key which is used in the network into
the Pre-shared Key field.
4
Click the
Übernehmen
(Apply) button.
All values which you enter here must be conform with
those of the network. If you do not know the values or
where to find them, ask your network administrator or,
if you are authorized to do so, look at the configurati-
on settings of the access point/router.
This register card gives you information about the sta-
tus of the network. No settings can be made here.
Zugeordnete BSSID
(MAC (Assigned BSSID (MAC)
tells you hexadecimally the identity of the network in
the form of the MAC address of the access point. This
information helps a network expert to find any possib-
le faults.
SSID
shows you the identity of this profile. It is only
possible to make a connection if the network has the
same SSID (this can be established by looking at the
Netz-Übersicht (Network overview) register card (see
page 25)).
Übertragungsrate
(Transmission rate) tells you the
present speed at this time in the network.
Kanal
(Channel) tells you the radio channel which is
being used.
In the
Durchsatz
(Throughput) field you can see the
data traffic in the network in the form of the coming
(Empfangsfragmente) and going (Sendefragmente) data packages.
Signalstärke
(Signal strength) and
Rauschen
(Interference) tell you whether the network is stable.
t
Status tab
