Getting started 5
Speedport OptoLAN / T-Com_en / A31008-M1062-A151-2-7419 / starting.fm / 12.09.2006
Version 2, 23
.0
5.2005
Getting started
Your Speedport OptoLAN is a high quality device that will only operate
to your full satisfaction if you comply with all the requirements for star-
tup.
Put your Speedport OptoLAN into service as follows:
■
Unpack and check the package contents
■
Set the device up
■
Connect the POF cable
■
Connect the Ethernet cable
■
Connect the device to the power supply
Unpacking the device
Package contents
■
Two Speedport OptoLANs
■
Two plug-in power supplies for Speedport OptoLAN
■
30 m POF cable
■
One POF cable cutter
■
Two Ethernet cables (cat. 5, gray, 1.80 m)
■
Printed user guide
Checking the package contents
Before you put your Speedport OptoLAN into service, you should
check it carefully to make sure it is not damaged.
■
Is there any visible damage to the
packaging
, indicating that the
device could have been dropped during transport?
■
Is there any visible damage to the
casing
or the
plug-in power sup-
ply
or
the network cable
?
Never put the device into operation if it is damaged!
If you have any
doubts, you should contact T-Com Customer Service (see page 11).
Note
Keep the original device packaging. You can use it to
transport the device during a move or to dispatch it else-
where.