T+A V10, User Manual

Page: 33 / 44

Approved usage
This device is designed exclusively for reproducing
sound and/or pictures in the domestic environment. It is
to be used in a dry indoor room which meets all the
recommendations stated in these instructions.
Where the equipment is to be used for other purposes,
especially in the medical field or any field in which safety
is an issue, it is essential to establish the unit’s suitability
for this purpose with the manufacturer, and to obtain prior
written approval for this usage.
 equipment which includes a radio or television
receiving section must be operated within the stipulations
laid down by the Post Office and the Telecommunications
authorities in the country in which it is used.
This unit may only be used to receive or reproduce those
transmissions which are intended for public reception. The
reception or reproduction of other transmissions (e. g.
police radio or mobile radio broadcasts) is prohibited.
Changing the batteries
To open the battery compartment disconnect the latch by
pressing in, then lift the cover out. Remove the old cells
and fit three new dry cells of the
LR 03 (MICRO) type in
the battery compartment, taking care to fit them with
correct polarity. Please remember that
all the cells must
be replaced at the same time.
Note:
If you have already re-set the remote control system to
Address 2, you will need to repeat the change procedure
after fitting new batteries.
Disposing of exhausted batteries
Exhausted batteries must never be thrown into the
household waste!
They should be returned to the
battery vendor (specialist dealer) or your local toxic
waste collection point, so that they can be recycled or
disposed in a proper way. Most local authorities
provide collection centres for such waste, and some
provide pick-up vehicles for old batteries
Care of the unit:
Disconnect the mains plug from the wall socket before
cleaning the turntable.
To clean the machine simply wipe the surfaces with a soft,
damp cloth or sponge. Do not rub the surfaces with a dry
cloth. Please just use clean water to moisten the cloth, or
water with a small addition of a mild cleaning agent such
as a neutral cleaner, soft soap or similar. Never use any
organic solvent which might contain materials such as
paint thinners, alcohol or lighter fuel.
Before using the unit again be sure to check that there
are no short-circuits at the connections, and that all con-
nectors are correctly fitted and firmly inserted.
Approval and conformity with EC
directives
In its original condition the unit meets all currently valid
European regulations. It is approved for use as stipulated
within the EC.
By attaching the CE symbol to the unit  declares its
conformity with the EC directives 89/336/EEC , amended
by 91/263/EEC , amended by 93/68/EEC , and also
73/23/EEC , amended by 93/68/EEC and the national
laws based on those directives.
The original, unaltered factory serial number must be
present on the outside of the unit and must be clearly
legible! The serial number is a constituent part of our
conformity declaration and therefore of the approval for
operation of the device.
The serial numbers on the unit and in the original

documentation supplied with it (in particular the
inspection and guarantee certificates), must not be
removed or modified, and must correspond.
Infringing any of these conditions invalidates 
conformity and approval, and the unit may not be operated
within the EC. Improper use of the equipment makes the
user liable to penalty under current EC and national laws.
Any modifications or repairs to the unit, or any other
intervention by a workshop or other third party not
authorised by
 , invalidates the approval and
operational permit for the equipment.
Only genuine  accessories may be connected to the
unit, or such auxiliary devices which are themselves
approved and fulfil all currently valid legal requirements.
When used in conjunction with auxiliary devices or as
part of a system this unit may only be used for the
purposes stated in the section
' Approved usage ' .
FCC Information
to the user
(for use in the United
States of America only)
Class B digital device – instructions:
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and
receiver.
-
Connect the equipment into an outlet on a circuit
different form that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV
technician for help.
33