T+A R Series, User Manual

Page: 46 / 50

46
Trouble shooting
Many problems have a simple cause and a correspondingly simple solution. The following section desc ribes a few
difficulties you may encounter, and the measures you need to take to cure them. If you find it impossible to solve a
problem with the help of these notes please disconnect the unit from the mains and ask your authorised

specialist
dealer for advice.
Device does not switch on
Cause:
Mains lead not connected correctly.
Remedy:
Check connection, push plug in firmly.
Fluctuating sound. Cause 1:
Bearing not oiled sufficiently.
Remedy:
Oil the bearing: see section entitled ' Fitting the platter ' .
Cause 2:
Drive belt worn or exhausted.
Remedy:
Replace drive belt.
Cause 3:
Drive belt oily.
Remedy:
Clean drive belt, pulleys and / or platter with methylated spirit on a cloth.
Unwanted hum
Cause:
The G 2000 R or a device connected to it is not earthed.
Remedy:
Connect a separate chassis earth wire ( G 2000 R
: earth terminal ‘GND’ to earth
clamp on the machine to which it is connected).