T+A R Series, User Manual

Page: 28 / 50

28
Front panel controls

( On / Off switch )
A brief press on the

button switches the unit on and off. When the
machine is switched on, the button glows.
 
If the turntable is used in conjunction with an R -system, the G 2000 R is
switched on via the existing R2
LINK
connection when you select the phono
input “
IN 4
” as listening source; alternatively the
G 2000 R switches the
connected amplifier on, with the correct source selected, as soon as the

button on the G 2000 R is pressed. When you switch the R -system off,
the G 2000 R is automatically switched off.



Caution!
The mains button is not a mains isolation switch. Even when power
button is not glowing, parts of the machine remain connected to the
mains power supply (Standby mode). The stand-by current drain is stated
in the chapter entitled 'Specification'.
If the unit is not to be used for a long period we recommend that you
disconnect the mains plug at the wall socket.

/
 Disc speed select button
When the disc platter is stationary, pressing one of the buttons starts the platter
motor running at the rotational speed stated above the button. The button
glows red while the motor runs up to speed. The button glows white as soon as
the nominal speed is reached.
Simply press the other of the two buttons to change the disc speed.
Stopping the platter motor
When the disc platter is turning, it can be stopped by briefly pressing the
glowinging button: the platter is actively braked, and comes to rest after a brief
period.