54
Storing
Network
Settings and
Restarting
Finally select the “
Store and exit?
” menu point and press the
button to accept the settings.
Connecting to WLAN via the WPS-function
WPS-function
The
MP 8
supports WPS for WLAN setup. WPS (Wi-Fi Protected Setup)
an easy process for establishing a secure WLAN connection. WPS can
be used to connect the
MP 8
with your router in a quick and convenient
way. For that usage most modern routers have implemented the WPS
function.
Connecting
WLAN
automatically
via the WPS
function
First activate the WPS-function of the Router or Repeater to which you
wish the
MP 8
to be connected. For details please refer the manual of
the device in question.
Start the WPS-Autoconnect function of the
MP 8
within 2 minutes.
Use the
/
buttons to select the menu point “
WPS-
Autoconnect
”, then confirm your choice with the
button.
After the connection is established, the line “Status” shows the
connected WLAN network.
Finally select the “
Store and exit?
” menu point and press the
button to accept the settings.
Selecting the
WLAN
manually and
conneting via
WPS
If the WPS function connects the
MP 8
to the wrong WLAN, the preferred
WLAN can be also selected manually and only the authentication can be
done by the WPS function. The procedure is described in the following:
First activate the WPS-function of the Router or Repeater to which you
wish the
MP 8
to be connected. For details please refer the manual of
the device in question.
First select the menu point “
Scan for WLANs
”, and activate it by
pressing the
button.
A list of the WLANs found is displayed on the screen.
Use the
/
buttons to select the WLAN to which you
wish the
MP 8
to be connected, and confirm your choice with the
button
Summary of Contents for MP 8
