T+A MP 8, Owner'S Manual

Page: 19 / 64

19
Music services
menu item
At this point you can enter the access data for the music streaming
services (TIDAL etc.) supported by the
MP 8 .
Calling up this menu point by pressing the

/

-button
displays a list Select the service you wish to use, then confirm your
choice with the

/

-button.
Now use the

/

/

/

buttons on the FM8 to
enter your access data in the lines “
Username
” and “
Password
”; this
data is provided by your service provider.
Use the

/

-button to switch between numeric and alpha-
numeric data entry, and between capitals and lower case.
Press the

-button to erase a letter.
When you have entered your username and password confirm each step
by pressing the
 /

-button.
To conclude the procedure and save the data, select the menu entry
“
Store and exit?
” and confirm by pressing the
 /

-button.
To conclude the procedure and save the data, select the menu entry
“
Store and exit?
” and confirm by pressing the
 /

-button.

If access data for the selected music service has already been stored,
the new data will overwrite them. To use the new access data you must
first perform a “Logout” for the service in question, then switch the
MP 8
off and on again.

The music streaming services supported by the MP 8 require a
subscription to the appropriate service provider.
Bandwidth
limit
menu item
This menu point can be used to adjust the link speed of the Internet
connection. The bitrate of the Internet radio stations and streaming
services is adjusted automatically to match your chosen setting. If you
select “
no limit
” for bandwidth limit, the highest available quality is
always selected automatically.

If you do not know the exact bandwidth of the internet connection, we
recommend that you select the setting at which no drop-outs occur
during playback.
Energy saver
(Stand-by
mode)
menu item
The MP 8 features two stand-by modes: ECO Standby with reduced
stand-by current drain, and Comfort Standby with additional functions,
but slightly higher current drain. You can select your preferred stand-by
mode in this menu point:
On (ECO Standby)
Active functions in ECO Standby mode:

Can be switched on by remote control

Automatic power down function after 90 minutes without signal
Off (Comfort-Standby)
The following expanded functions are available:

Can be switched on by App

Automatic power down function off