T+A MP 8 Owner'S Manual Download Page 46 | Manualshive

Page: 46 / 64

background image

46

Safety notes

For your own safety please consider it essential to read these
operating instructions right through, and observe in particular the notes
regarding setting up, operation and safety.

Installation

Please consider the weight of the device. Never place the device on an
unstable surface; the machine could fall off, causing serious or even
fatal injury. Many injuries, especially to children, can be avoided if the
following simple safety precautions are observed:



Use only such items of furniture which can safely bear the
weight of the device.



Ensure that the device does not project beyond the edges of the
supporting furniture.



Do not place the device on tall furniture (e.g. bookshelves)
without securely anchoring both items, i.e. furniture and device.



Explain to children the hazards involved in climbing on furniture
to reach the device or its controls.

When  installing  the  unit  on  a  shelf  or  in  a  cupboard  it  is  essential  to
provide  an  adequate  flow  of  cooling  air,  to  ensure  that  the  heat
produced  by  the  unit  is  dissipated  effectively.  Any  heat  build-up  will
shorten the life of the unit and could be a source of danger. Be sure to
leave free space of 10 cm around the unit for ventilation.
If the system components are to be stacked then the amplifier must be
the top unit. Do not place any object on the top cover.
The  unit  must  be  set  up  in  such  a  way  that  none  of  the  connections
can be touched directly (especially by children). Be sure to observe the
notes and information in the section

'Installation and Wiring'

.

Power supply

The device is intended to be connected to mains outlet with protective
earth connector. Please connect it only with the mains cable supplied
to a properly installed mains outlet with protective earth connector.
The power supply required for this unit is printed on the mains supply
socket.  The  unit  must  never  be  connected  to  a  power  supply  which
does  not  meet  these  specifications.  If  the  unit  is  not  to  be  used  for  a
long period disconnect it from the mains supply at the wall socket.

Mains leads /
Mains plug

Mains leads must be deployed in such a way that there is no danger of
damage  to  them  (e. g.  through  persons  treading  on  them  or  from
furniture).  Take  particular  care  with  plugs,  distribution  panels  and
connections at the device.
Unplugging  the  mains  plug  will  disconnect  the  device  from  the  mains
for service and repair. Please make sure that the mains plug is easily
accessible.

«
...
44
45
46
47
48
...
»

Summary of Contents for MP 8

































































Reviews:

No comments

Related manuals for MP 8

Brand: JBL Pages: 22

Brand: Laney Pages: 14

Brand: Lab.gruppen Pages: 13

Brand: Pass Pages: 7

Brand: SpeakerCraft Pages: 27

Brand: DAPAudio Pages: 18

Ininity INFDSP4425

Brand: Harman Pages: 34

Brand: Plinius Pages: 22

Brand: Unika Pages: 16

High-Q Kit K1803

Brand: Velleman Pages: 9

PowerLight 6.0 II

Brand: QSC Pages: 28

Harley Benton HBW-80

Brand: thomann Pages: 24

Brand: Tangent Pages: 7

Brand: Rotel Pages: 10

Brand: Ocean Matrix Pages: 2

Brand: NAD Pages: 20

ROCKER 15 TERROR

Brand: ORANGE Pages: 4

Brand: Harman Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands