T+A DAC 200, User Manual, Page: 50 / 64

On / Off Switch
A brief press switches the DAC 200 on.
Hold the button pressed in to switch the device off.
A brief press when the machine is operating switches the outputs ANA-
LOG OUT 1 and 2 off and on (Muting).
Please note the chapter
Automatic power down function on page 61.
Source selection
Selects the analog inputs ANALOG IN and USB IN. To switch between
ANAGLOG IN and USB IN, press the button again if necessary.
Selects the digital inputs S/P DIF 1 and S/P DIF 2.
Press the button again to switch between the two inputs.
Selects the optical digital inputs OPT 1 and OPT 2
To switch between the inputs, press the button repeatedly if
necessary.
Selects the digital inputs AES / EBU and BNC.
To switch between the two inputs, press the button repeatedly.
If the HDMI module is installed (optional), this button also selects the
HDMI inputs 1,2 and ARC.
To switch between the inputs, press the key repeatedly if necessary.
Volume control
Rocker for controlling the volume.
Press „plus“ or „minus“ to adjust the volume in fine steps. If the button
is kept pressed longer, the volume is increased/decreased continuously
until the button is released.
Menu operation
Cursor buttons for menu operation.
Use the
buttons to select a menu item.
Press the OK button to activate the selected menu item.
Press the
buttons to change the settings.
Then press the OK button to confirm the setting.
Settings
A brief press: Opens the menu for tone controls.
A long press: Opens the system settings menu.
See also chapter
System settings.
Remote control
50