T+A DAC 200, User Manual, Page: 47 / 64

Currently selected source
Set volume with bar graph
Device information /
Settings
Format (e. g. PCM 44.1 kHz)
4
Source selection
ANALOG
Selects the analog input ANALOG IN (RCA).
USB Selects the digital USB DAC input USB IN.
S/P-DIF Selects the coaxial digital inputs S/P DIF 1 and 2.
Press the button again to switch between 1 and 2.
OPT Selects the optical TOSLINK digital inputs Optical 1 and Optical 2.
Press the button again to switch between 1 and 2.
AES
BNC Selects the digital AES/EBU and the digital BNC input.
Press the button again to toggle between the two inputs.
HDMI
ARC
Selects the digital inputs HDMI 1, HDMI 2 or the return channel ARC.
To switch between the inputs, press the button repeatedly if necessary.
5
Preamplifier outputs
OUT
A brief press switches the preamplifier outputs ANALOG 1 (XLR) and ANALOG 2
(Cinch / RCA) off and on (MUTING function). The LED above the button indicates the
current switching state.
6
System settings
MENU A brief press
of this button opens and closes the tone settings.
(see chapter System settings ).
A long press
opens and closes the system settings menu.
(see chapter
System settings
).
7
Remote control receiver
When operating by remote control, please point FM200 in the direction
of the receiver.
8
Volume control and menu operation
VOLUME
SELECT / OK
The desired volume can be set by turning this control knob. The currently set value is
shown in the display.
A brief press on the knob mutes the output.
In addition to volume control, this control knob is also used to configure the menus
for system settings and tone controls.
8
Display
47