74
The Configuration for a Wired Ethernet LAN
or Power-Line LAN connection
Setting the
Parameters for
a Wired
Network
•
Connect the
to an operational network or Power-Line modem
using the LAN socket on the back panel.
•
Switch the
on, and select the Streaming Client function by
pressing the
button.
•
Call up the Configuration menu as described above. You should now
see the menu reproduced below, displaying the network parameters. In
the title line the message
'LAN'
should appear, indicating that the
machine is connected to a wired LAN. If you see
'WLAN'
at this point
instead, please check your network connection, and ensure that the
network is switched on and operational.
•
You can now select the individual menu points and adjust them to
match your network conditions. The illustration below shows the
possible button inputs after each menu point.
Settings
/
: Switching ON / OFF
(0...9):
Numeric input, separating dots are automatically
generated; input limited to valid addresses
(0...9, A...Z):
Alpha-numeric input and special characters.
IP - separating dots must be entered as special
characters.
The parameters illustrated above are only typical values.
Addresses and settings may require different values for your network.
