53
Menu point
Display
brightness
Here you can adjust the brightness of the screen in normal use to suit
your personal preference. The available settings are:
1 to 7
Menu point
Comfort
standby
(Stand-by
mode)
The
features two stand-by modes: ECO Standby with reduced
stand-by current drain, and Comfort Standby with additional functions,
but slightly higher current drain. You can select your preferred stand-by
mode in this menu point:
Off (ECO Standby): Active functions in ECO Standby mode: can only be
switched on by remote control
On (Comfort-Standby): The following expanded functions are available:
Alarm-timer, clock display and the automatic power on function for one of
the aux-inputs (A1 IN or A2 IN).
Menu point
Language
In this menu point it is possible to determine the language which is to be
used for the displays on the integral screen on the front panel of the
.
The language used for any transferred data, e.g. from an iPod or an
Internet radio station, is determined by the device itself or the radio
station, and therefore
cannot
be selected on the
.
Menu point
System /
Update
At this menu point you will find seldom needed functions such as
software updates, regional setting for the tuner, activation of optional
special functions, and reset of default settings.
Sub-point
Update
At this menu point you can check the software version of the individual
sub-assemblies / modules by pressing the
/
buttons. It is
also possible to initiate the update process via USB or LAN (Internet).
For detailed information about updating the software please visit our
Homepage
www.ta-hifi.com
> Support > Hardware/Software.
Sub-point
Reset all for
region
At this menu point you can adjust the radio de-emphasis for your
particular region.
Sub-point
Factory
settings
Here you can reset the machine to its original state, i.e. when it was
delivered. All settings are reset, and stored favourites etc. are erased.
Sub-point
Code
At this menu point activated functions such as gapless playback (GPL
ok) are displayed. If you obtain a code to activate any optional special
functions, it can be entered here.
Network Settings
The method of using this menu and its settings are described in detail in the Chapter Installation
/ Using the system for the first time, Network configuration (Page 72).
