55
Appendix
Cause 3:
K6
not set to surround mode.
Remedy:
Set to surround mode, or select one of
the sound fields.
Cause 4:
Programme contains no information on
the auxiliary channels (e.g. stereo ma-
terial).
Remedy:
If you wish, call up the
'Main Menu'
and
select a sound field.
Cause 5:
The level for the channel affected is set
too low.
Remedy:
Call up
'Loudspeaker Balance Menu'
and raise the level.
Problem:
No bass, or inadequate bass.
Cause 1:
No subwoofer connected, but activated
in
'Loudspeaker Menu'
.
Remedy:
Connect subwoofer, or disable sub-
woofer in
'Loudspeaker Menu'
.
Cause 2:
Size of loudspeakers entered incor-
rectly in
'Loudspeaker Menu'
.
Remedy:
Call up
'Loudspeaker Menu'
and
check that settings match the loud-
speakers in your system; correct if
necessary.
Problem:
The signal from an analogue source
device occasionally suffers distor-
tion during very loud passages. The
integral screen shows
' O V E R L O A D '
' O V E R L O A D '
' O V E R L O A D '
' O V E R L O A D '
Cause:
The analogue/digital converter is over-
loading.
Remedy:
Re-calibrate the analogue/digital converter
to this source device. See
'Inputs Menu'
.
Picture problems:
Problem:
'Main Menu'
not displayed on the
television screen.
Cause:
On-screen display of
'Main Menu'
switched off in
'Configuration Menu'
.
Remedy:
Call up
'Configuration Menu'
and
switch on '
On-screen
Menu'
.
Problem:
No picture from some or all source
devices.
Cause:
Source devices not supplying the
switching signal which the TV set re-
quires to switch over to AV mode.
Remedy:
Set television to
'constant AV opera-
tion'
mode.
Problem:
Neither on-screen menu nor other
external programs appear on the TV
screen. TV only shows those sta-
tions which are received via its own
aerial.
Cause 1:
Video cable not connected properly.
Remedy:
Push in all connectors firmly.
Cause 2:
The TV set does not switch automati-
cally to the AV input.
Remedy:
Set the TV to
'AV mode'
.
Problem:
Picture unstable.
Cause:
Synchronisation signal absent.
Remedy:
Push connector in firmly, or set TV to
'AV mode'
.
Problem:
Monochrome picture only.
Cause:
Incompatible video norms set on the
TV, the
K6
and the source device.
Remedy:
Set TV,
K6
and source device to the
same video norm.
Note:
If problems persist, set the
K6
to the
'
RGB / Video
' norm; select the video
norm '
Video'
(occasionally also termed
'
CVBS'
or '
Composite'
) on the TV set
and the source device.
Problem:
Nothing appears on the integral
screen.
Cause:
The screen is switched off.
Remedy:
Switch the screen on again (see
button).
Problem:
The automatic 4:3 / 16:9 format
switch does not work.
Cause 1:
The TV set is not exploiting the switch-
ing signal supplied through the SCART
cable.
Remedy:
Switch TV set to '
controlled AV opera-
tion'
mode, or switch TV set manually.
Cause 2:
The source device is not supplying the
requisite switching signal.
Remedy:
Switch TV set manually.
Cause 3:
You are using the wrong cables. The
switching signals are only passed via
SCART cables.
Remedy:
Use SCART cables.
