17
Operation
The Tuner as alarm clock
Operation:
Switch on Tuner mode
TUNER
TUNER
TUNER
TUNER
then e.g.
WDR 2
WDR 2
WDR 2
WDR 2
press
for 2 sec.
Open
Alarm Menu
By RDS ON
By RDS ON
By RDS ON
By RDS ON
Select menu point
/
Change menu point
Activate selection
or
Close
Alarm Menu
Explanation:
The
K6
includes a timer module which can switch the
unit on at a pre-set time. The '
Alarm
Menu
'
provides
access to all the settings which are required for the alarm
function.
The alarm function only works in Tuner mode. This is to
ensure that a source signal is actually present when the
unit is switched on by the timer!
Hold the
button pressed in until the '
Alarm
Menu
'
opens.
The menu appears on the TV set connected to the sys-
tem; the integral screen shows the first menu point.
Clock:
This function lets you set the internal clock manually to
the correct time using the
/
buttons. At first the
time changes slowly, but if you hold the button pressed
in the rate of change increases.
Note
Setting the clock manually is only possible if you have
selected
manual
in the
'Set clock'
menu point.
Setting the clock:
In this menu point you determine how the internal clock
is to be set.
manual
You can set the time of day manually in
the
'Clock'
menu point
by RDS
The time of day is read automatically from
the RDS signal, and accepted by the
K6
;
this only works if a high-quality RDS signal
is present. If you pick this option you
can-
not
change the time of day
manually
.
Alarm:
The alarm function can be switched on and off in this
menu point.
on
Alarm function switched on
off
Alarm function switched off
Note
When the timer is switched on, the
Timer symbol
is
displayed on the integral screen.
Alarm time:
This function lets you set the alarm time manually using
the
/
buttons. At first the time changes slowly,
but if you hold the button pressed in the rate of change
increases.
Loudspeaker:
In this menu point you set which loudspeakers
(
A /
B
) are active when the alarm is triggered.
A
Loudspeakers
A
(in main room) switched on
B
Loudspeakers
B
(in adjacent room) switched on
A+B
Loudspeakers
A
and
B
switched on
Alarm volume
A /
B:
In this menu point you can adjust the alarm volume for
speakers
A
(main room) and
B
(adjacent room)
separately. However, this is only possible if you have
already set the
Volume A/B
menu point to
split
in the
'
Loudspeaker Menu'
. When you change the volume
using the
and
buttons, the system immediately
accepts the indicated level so that you can hear the new
volume.
Program for alarm:
Selects the program which is to be selected when the
alarm is triggered, using the
/
buttons.
