25
FM ANT
(antenna input)
This FM antenna input can be connected to a normal 75
Ω
FM home antenna
or to TV/FM cable networks. For first-class reception quality a high-
performance aerial system, competently installed, is a basic requirement.
DIGITAL OUT
Digital co-axial output for connection to an external digital/analogue converter
with an co-axial cable.
It is not always possible to produce a digital version for all media, as in some
cases the original contains copy protection measures which prevent this.
DIGITAL IN
Inputs for digital source devices with optical or coaxial digital audio output.
WLAN
Input socket for WLAN antenna
Automatic Activation of the WLAN Module
After powering on the
Music Receiver
detects if it is connected to a wired LAN
Network.
If no wired LAN connection is found, the
Music Receiver
will automatically
activate ist WLAN module and it will try to get access to your WLAN network.
Attention!
When WLAN shall be used, the LAN socket must be left unconnected.
LAN
Socket for connection to a wired LAN (Ethernet) home network.
If a LAN cable is connected this will have priority over wireless WLAN net-
works. The WLAN module of the
Music Receiver
will automatically be
disabled.
USB HDD
Socket for USB memory sticks and external hard discs
The storage device must be formatted with a FAT16 or FAT32 filesystem.
The USB device (example 2,5 inch HDD) can be supplied with power from the
Music Receiver
via the USB socket provided the power consumption of the
USB device conforms to the USB standard.
USB iPod
Socket for iPods (use the original lead supplied with the iPod for this)
Instead of connecting the iPod directly, you can use the
iPod Docking
Station with USB connector (Order No. 4362 99301), which is available as an
accessory.
RS 232
Interface for firmware upgrades
This interface can also be used for control of the
Music Receiver
– for example
in combination with a CRESTRON or AMX home automation system.
To enable device control via the RS232 interface, the
Music Receiver
must be
equipped with a special firmware. A description of the control interface and the
control protocol can be found in the download section of the
website
(http://www.taelektroakustik.de).
E
LINK
Control input / output for
E
LINK
– systems.
Mains switch
The primary mains switch is used to isolate the machine completely from the
mains supply.
To operate the amplifier the primary mains switch must be moved to the '1'
position.
Mains input
The mains cable is plugged into this socket.
For correct connections refer to the sections
'
Installation and wiring
'
and
'
Safety notes
'
.
