10
Basic settings of the Music Receiver
System Settings (System Configuration menu)
In the System Configuration menu general device settings are adjusted. This menu is described in detail in the following
chapter.
Calling up and operating
the menu
•
Briefly press the
button on the front panel or on the remote control
handset to call up the menu.
•
When you open the menu, the following Select points appear on the screen:
•
Use the
/
buttons to select a point in the menu.
•
If you wish to change a selected menu point, first press the
button,
and then use the
/
buttons to alter it.
•
After making the change, press the
button again to accept the
new setting.
•
You can press the
button at any time to interrupt the process; the
change is then abandoned.
•
Press the
button again to leave the menu.
Source names
menu point
At this menu point you can activate and disable external sources, and assign a
plain text name to each source; this name then appears in the screen displays.
When you call up this menu point using the
button, a list of all the
external sources of the
Music Receiver
appears. Each source is followed by
the assigned name, or if you have disabled the source concerned the note
'
disabled
'
.
If you want to activate / disable a source, or change the plain text name,
navigate to the appropriate line.
To activate a source, press the green button; pressing the red button disables
the source.
To change the plain text name, press the
button once more. Change
the name as you wish, then press
to confirm your choice. This action
stores the settings for the source.
When you call up Source Select using
/
on the remote control
handset or the source button
/
on the front panel, any disabled
sources are suppressed. This makes it easier to select sources, and we
recommend that you disable any sources not in use.
