T+A Elektroakustik DD 1535 R, Operating Instructions Manual

Page: 48 / 64

48
Recorders
(audio devices with record and playback facilities)
Analogue recorders
The components of your system should be connected as
shown in Wiring Diagram 6. This is the procedure:
•
Connect the
INPUT
sockets of the recorder to the
OUT
sockets (e. g. VCR 1 ) of the DD 1535 R , and the
OUTPUT sockets of the recorder to the IN sockets
(e. g. VCR 1 ) of the DD 1535 R . Take care to maintain
the correct channel assignment (
L
to
L, R
to
R
).
Note:
It is only possible to record from sources whose analogue
sound outputs are connected to the
DD 1535 R
. If you are
using a device with a digital sound output, please be sure
to connect the analogue sound output to the input sockets
of the
DD 1535 R
at the same time.
*1 If you also wish to use VCR 2 as a Hi-Fi audio
recorder, please connect its sound outputs to the
TAPE 2 outputs of the stereo amplifier, using a Y-
lead if necessary.
*
Sound cable between DVD player and stereo amplifier only necessary if the DVD is also to be used for pure two-
channel stereo reproduction via the stereo amplifier, or if you wish to use an audio recorder (TAPE) to make sound
recordings from the DVD player.