T+A Elektroakustik CC 820 M, Manual

Page: 34 / 48

34
Basic settings
Certain adjustments do not need to be made every time
you make a recording; you just need to make them once.
Amongst them are:
•
Choice of play mode (see ' Special Recorder
Functions ' ).
•
Choice of DOLBY noise reduction system (B, C or
NR OFF) by pressing the appropriate     button.
•
When recording from the tuner, MPX filter on / off
(see Special Recorder Functions).
Making the recording
Once you have completed all the preparations for
recording, the tape deck should be in "record ready"
mode - the LED above the
    button must be
glowing.
For the recording process the     and    
buttons are used both to start the recording and to
interrupt it.
•
Start the recording at the appropriate moment
- Side A: press the     button
- Side B: press the

 

button
•
You can interrupt the recording at any time (e. g. to
skip a CD track, or to suppress advertisements or
verbal commentaries when recording from the tuner)
- Side A: press the     button again
- Side B: press the     button again
•
The Record indicator (  ) in the screen area flashes
when the machine is in Record Pause mode.
•
Remember to resume recording after any interruption
- Side A: press the     button again
- Side B: press the     button again
•
End the recording process:

 

/

 

button
Note:
In addition to adjusting the bias, balance and level
settings before making the recording, you can also make
adjustments while recording is taking place.