28 (36), 0-004-7506-4 (EN)
TAC AB, 2001-08-08
TAC Xenta OP Handbook
4 Dialogs with TAC Xenta 300 and 401
4.5
Access Code
Every item that is displayed in a menu on the operator panel has an
access level, which can be low, medium or high. An item with low
access level will always be visible on the display of the operator
panel.
To show items, with access level medium or high, a correct access
code has to be given. There is one code giving access to low
and
medium level items and one to give access to
all
levels.
The default codes are
Medium level: 1111
High level:
2222
To change access level go to the following menu:
AH02: ACCESS CODE
CODE: 0000
Change code to
extend menu
Use
to move the cursor between the digits and use
+
and
–
to change their value. When finished, leave the menu with
.
If the correct code has been entered, some more items will now be
visible in the list, for example “Edit Access code”:
Special cases
If you want the time channel to be
turned off
for the whole day and
night and use the 24 hour clock, you indicate this by
00:00-00:00
and with the AM/PM clock (please refer to section 4.1)
12A00-12A00
If, in stead, you want the time channel to be
turned on
for the whole
day and night and use the 24 hour clock, you indicate this by
00:00-24:00
and with the AM/PM clock
12A00-00P00
In the latter case the end time (24:00 respective 00P00) is a normally
’nonexistent’ time value.
Summary of Contents for Xenta OP
