SHORT TAPERED STYLES-
′
FLAT TOPS & SHORT CUTS
1.
Starting with the longest attachment comb(12mm), cut from the back of the neck to the crown
.Hold the attachment comb flat against the head and slowly move the clipper through the hair , as
shown below (see diagram 8).
2.
Use the same procedure from the lower side to the upper side of the head (as illustrated). Then
cut the hair against the direction in which it grows and then level the cut from the sides.
3.
To give a ′flat top’ look; the hair on top of the head must be cut over the top of a flat comb rather
than by using the attachment comb.
4.
Use closer cutting attachment combs to decrease the hair down to the neckline as desired. Comb
hair and check for uneven areas.
CARE AND CLEANING
Before cleaning, make sure to switch off the appliance and unplug it.
Clean and oil the appliance after each use.
Remove cut hair from the clipper with the brush enclosed.
Wipe the clipper with a dry soft cloth.
Oil the blades as mentioned above.
Do not use any chemicals or abrasive liquids to clean this product.
STORAGE
Keep the appliance in a dry place.
You may hang the cutter by the loop provided.
The blades must be oiled during storage period.
SPECIFICATIONS
Electric Hair Trimmer
Powerful Motor (9W)
Gradual Level Control for closeness of your cut
4 Attachment combs to choose from
Stainless Steel blades
Power Source: 220V/50Hz
Accessories Supplied:
o
Oil Bottle
o
Scissors
o
Brush
o
Comb
