10
4111-0014 — Apr. 2020
© 2020 Systems, LLC
Installation Precautions
DO NOT connect the vehicle restraint electrical
wiring and ground connections until all welding has
been completed.
DO NOT ground welding equipment to any hydraulic
or electrical components of the vehicle restraint.
Always ground welding equipment to the vehicle
restraint base, NEVER to the moving components.
Failure to follow these instructions may damage the
motor, hydraulics, wiring, and/or control panel.
In applications where adhesive anchors will be
used, holes must be properly prepped and cleaned
before applying adhesive into holes. Refer to
adhesive instructions for further detail.
INSTALLATION
DO NOT grind or weld if hydraulic fluid or other
flammable liquid is present on the surface to be
ground or welded.
DO NOT grind or weld if uncontained hydraulic fluid
or other flammable liquid is present. Stray sparks
can ignite spills or leaks near the work area. Always
clean up the oil leaks and spills before proceeding
with grinding or welding.
Always keep a fire extinguisher of the proper type
nearby when grinding or welding.
Only trained installation professionals with the
proper equipment should install this product.
It is recommended and good safety practice to use
an additional means to support the dock platform
and lip anytime when physically working in front of
or under the dock leveler. This additional means
may include, but is not limited to a boom truck, fork
truck, stabilizing bar or equivalent.
Always post safety warnings and barricade the
work area at dock level and ground level to prevent
unauthorized use of the dock leveler before
installation is complete.
A hard hat or other applicable head protection
should always be worn when working under or
around a dock leveler.
Always stand clear of platform lip when working in
front of the dock leveler.
